DEVELOPMENT OF AN AUTOMATED DESIGN SYSTEM FOR FLEXIBLE AUTOMATED PRODUCTION
Abstract
Design of flexible manufacturing systems (FMS) of modern multi-level production is usually carried out on the basis of general rationing when using large recommendations. At the same time, the specifics and features of a particular production are not always taken into account. In such a design, the most important is the experience of the designer, which is not always based on modern methods of optimizing project solutions. Therefore, the problem of creating automated design systems in the development of flexible automated productions (FAP), which use cost equipment with numerical control (CNC) is extremely urgent. The development of automated design systems is based on the ideas of a systematic approach that determine different cycles of the process: design – production preparation – production. Information about the projected object is generated in the process of project development by different groups of users: researchers, designers, designers, technologists, production organizers. A multilevel, cyclical design process requires the use of such a volume of information that cannot be processed without the use of modern mathematical methods and calculated equipment. Therefore, it is extremely important to create automated gap design systems, which are marked by greater versatility, efficiency and possibility of development, improvement and adaptation to the conditions of various enterprises. Such requirements served as the basis for the creation of an automated design system , which allows to take into account a huge amount of information in the automatic cycle during the development of the project. The scientific novelty of the work is the development of an integrated automation system for the design of processing technology and the selection of elements of FMS structures. At the same time, information unity with the system of technological training of production at the level of operation of FMS is ensured. The purpose of the work. Creation of an integrated automated system for the design of technological processes and elements of the structure of flexible automated production on the basis of modern CNC machines, industrial robots and equipment systems.
References
2. Melnikov, G.N., Voronenko V.P. Proektirovanie mekhanosborochnikh tzekhov . [Design of mechanical assembly shops.]. M., Mashnostroenie, 1990. 352 s. [in Russian].
3. Pukhovskiy, E.S. Proektuvannja tekhnologichnikh protzesiv v umovakh gnuchkogo avtomatizovanogo virobnitztva. [Design of technological processes in conditions of flexible automated production]. Visnik NTUU KPI, Mashinobuduvannja, vip. 59, 2010, s. 267–27. [in Ukrainian].
4. Pukhovskiy, E.S. Problemi grupirovanija detalej pri sozdanii GPS. [ Problems of grouping parts when creating GPS]. Visnik NTUU KPI, Mashinobuduvannja, 2009, s.14–20. [in Russian].
5. Domoradskij, A.N., Leskin A.A., Ponomarev V.M. Sistemnoe proektirovanie integrirovanikh proizvodstvennikh kompleksov. [Systematically projected integrated prozvodstvennyh complexes]. L. Mashinostroenie, 1986. 319 s. [in Russian].
6. Solomentzev, J.M., Sosonkin V.L. Upravlenie gibkimi proizvodstvennimi sistemami. [Manage flexible production systems]. M., Mashinostroenie, 1988, 352 s. [in Russian].
7. Solomentzev, J.M., Mitrofanov V.G., Pavlov V.V., Ribakov L.V. Informatzionno-vichislitelnie sistemi v mashinostroenii. GALS – tekhnologii. [Information and computing systems in mechanical engineering. GALS – technologies]. M., Nauka, 1989, 292 s. [in Russian].
8. Avramchuk E.F., Vavilov F.F., Emelianov S.V. Tekhnologija sistemnogo modelirovanija. [System Modeling Technology]. M., Mashinostroenie, Berlin, Tekhnik. 1988, 520 s. [in Russian].
9. Codd E.F. A relational model of data for large shared banks. Coom. ACM, 1970, H. 6. p. 377–387.
10. elch A., Emang J.T. Group technology, the heart of flexible manufacturing system. Brighton/ U.K., 1982. okt. p. 121–130.
ISSN 
ISSN 
